The EcoFlow Power Kit LFP Battery is a modular 5.120 Wh / 100 Ah LiFePO₄ storage block used to build or expand any EcoFlow Power Kit installation. Weighing 40,6 kg in a 50 × 26 × 30 cm case and operating at 51,2 V nominal, the pack pairs with the Power Hub through plug-and-play cabling and can be combined with up to two more identical units to reach 15 kWh of storage on a single system. The LFP chemistry is qualified for 3.500 charge cycles to 80 % of the original capacity, which corresponds to about ten years of daily deep cycling.

• 5.120 Wh / 100 Ah nominal capacity — a dense storage block designed for off-grid campers, tiny houses and small workshops.
• Continuous 80 A charge and 100 A discharge give the Power Hub plenty of headroom for heavy AC loads via X-Boost.
• Advanced battery management system regulates voltage, current and temperature in real time to protect the cells.
• Built-in self-heating keeps the pack usable in cold environments and can be pre-triggered through the EcoFlow app before a heavy discharge.
• Plug-and-play connection to the Power Hub — up to three identical packs can share the same hub without external cabling.
• Includes the connection cable and mounting strap (for the 5 kWh unit; the 2 kWh variant is sold without those accessories).

Key specs

• Nominal capacity: 5.120 Wh / 100 Ah
• Chemistry: LiFePO₄
• Life cycles: 3.500 cycles to 80 % capacity
• Nominal voltage: 51,2 V (min 40 V / max 56,7 V)
• Max continuous charge: 80 A
• Max continuous discharge: 100 A
• Weight: 40,6 kg
• Dimensions: 50 × 26 × 30 cm
• Warranty: 5 years

Suited to expanding an existing Power Kit installation without replacing the Hub, whether the goal is a longer winter reserve, a heavier workshop draw or a second-loop off-grid cabin. 2 kWh and 5 kWh Power Kit batteries cannot be mixed in the same system.