The EcoFlow 10kWh Independence Power Kit doubles the storage of the 5 kWh variant by stacking two 5.120 Wh LFP batteries under a single Power Hub, AC/DC Smart Distribution Panel and Console. Total usable capacity is 10.240 Wh at 51,2 V nominal, spread over two 40,6 kg blocks that measure 50 × 26 × 30 cm each and connect in parallel through the plug-and-play Power Kit cabling. This sizing is aimed at year-round camper use or a small off-grid home where at least two days of autonomy without sun are expected.

• 10.240 Wh of LiFePO₄ storage split across two matched batteries, both rated for 3.500 cycles to 80 % capacity.
• Two batteries share the 80 A charge and 100 A discharge limits per pack, so combined inrush from induction plates or workshop tools is absorbed easily.
• Three MPPT solar inputs at 15-150 V, 30 A each (up to 1.600 W per string) let you cover a large motorhome roof or a tiny-house shed with panels.
• AC/DC Distribution Panel with 6 × 220-240 V outlets at 10 A per port and 12 DC circuits (6 adjustable, 6 fixed, 20 A each) keeps wiring compact.
• Sub-second EPS switchover from grid to battery keeps critical loads online when a rural grid drops out.
• Console touchscreen at 1024 × 600 pixels shows both packs individually, so asymmetric wear or a failing cell is visible early.

Key specs

• Total battery capacity: 10.240 Wh (2 × 5.120 Wh / 100 Ah)
• Chemistry: LiFePO₄
• Life cycles: 3.500 cycles to 80 % capacity
• Nominal voltage: 51,2 V (min 40 V / max 56,7 V)
• Max continuous charge / discharge per pack: 80 A / 100 A
• Battery weight: 40,6 kg per unit
• Battery dimensions: 50 × 26 × 30 cm per unit
• Operating temperature: -20 °C to 50 °C
• Warranty: 5 years

A good fit for a two-person full-time van build or a compact off-grid workshop, where one 5 kWh pack would run tight in winter. 2 kWh and 5 kWh Power Kit batteries cannot be combined in the same system.