The EcoFlow Get Set Kit is an all-in-one power backbone designed for campers, caravans and tiny homes, built around the EcoFlow Power Hub with four independent charging paths that can all run at once. It is offered without batteries so you can size storage to your actual consumption, then stack matched 2 kWh or 5 kWh LFP packs on top as the project grows. The compact housing is intended for permanent installation in a vehicle bay or an electrical closet, and the whole system operates at 48 V DC to keep cable runs thin.

• Up to 4.800 Wp of solar input across three MPPT strings for high-yield harvesting even from mixed roof and awning orientations.
• Alternator charger accepts up to 1.000 W from a running vehicle engine while actively protecting the starter battery from over-draw.
• 3.000 W AC input from shore power or a household socket, with pass-through to loads when grid is present.
• Smart Generator input for up to 1.800 W of backup charging in overcast weeks.
• Modular battery bay accepts stackable LFP packs, so a 2 kWh install can grow to 15 kWh without replacing the hub.
• Plug-and-play cabling and shared 48 V rail keep installation time and wire gauge low compared with 12 V builds.

Key specs

• Solar input: up to 4.800 Wp across 3 MPPTs
• Alternator input: up to 1.000 W
• AC input: up to 3.000 W (shore / grid)
• Smart Generator input: up to 1.800 W
• Battery compatibility: EcoFlow Power Kit LFP 2 kWh or 5 kWh (stackable)
• System voltage: 48 V DC
• Design use: permanent installation in camper, caravan or tiny house

It suits builders who want to spec batteries separately and prioritise flexibility in charging sources — a good starting point when the vehicle or cabin will see mixed grid, solar and alternator use throughout the year.