This bundle pairs the EcoFlow DELTA Pro 3 Power Station with two rigid 400 W solar panels, mounting brackets and a 3.5 m XT60i cable, delivering 4,096 Wh of LiFePO4 storage and a solar-first workflow out of the box. Under good sun the pair of panels can top the station up in roughly 6 to 12 hours through the XT60i input. The station itself is expandable to 8 or 12 kWh with extra batteries, so the set scales with your needs.

• 4,096 Wh LiFePO4 core with 4,000 cycles to 80% capacity for a long service life.
• 4,000 W AC output across four Type F sockets, with an 8,000 W peak surge for tools, kettles or an EV top-up.
• Solar input up to 1,000 W on the LPV XT60 port and 1,600 W on the HPV XT60 port, so more panels can be added later.
• Two rigid 400 W monocrystalline PERC panels, 172.2 x 113.4 x 3.5 cm and 21.8 kg each, IP65-rated for outdoor mounting.
• UPS switchover in under 10 ms protects modems, NAS drives and desktops during grid dips.
• Wi-Fi and Bluetooth for remote monitoring and firmware updates via the EcoFlow app.

Key specs

• Capacity: 4,096 Wh
• AC output: 4,000 W (peak 8,000 W), pure sine
• Solar input: 1,000 W (LPV XT60) + 1,600 W (HPV XT60)
• Panel rating: 400 W (±3%) each, monocrystalline PERC
• Panel weight: 21.8 kg each; dimensions 172.2 x 113.4 x 3.5 cm
• Cell chemistry: LiFePO4 (LFP), 4,000 cycles to 80% capacity
• IP rating: IP65 (panels)
• UPS switchover: <10 ms
• USB-C: 100 W max per port (200 W total)
• Panel warranty: 10 years

A ready-to-run kit for off-grid cabins, long van trips or a whole-house emergency setup where you want serious solar throughput from day one.